Disclosure: This article may contain affiliate links. If you purchase through these links, the publisher may receive compensation at no extra cost to you. This is not engineering, electrical, or safety advice. Consult a licensed electrician before connecting anything to your home’s wiring.
The Energy Revolution System does several things well. It gives you a structured, illustrated build guide for a coil-based electronics project, at $39 — less than most single-evening hobby kits. The instructions are written for people who have never wound a coil, the materials are ordinary hardware-store parts, and the purchase carries a 60-day refund processed through ClickBank, which is the enforceable kind.
Its limitation is the marketing around it. The sales page promises you can “slash your power bill by 50–80%,” and that is not what the product delivers. What it delivers is a genuinely interesting weekend project that produces a small, working device — and the seller’s own fine print describes it as “an experiment” that “was not technically assessed.”
Buy it as a $39 education, not as a power plant, and it is a fair purchase.
What It Gets Right
It assumes you know nothing. The manual walks through coil winding, magnet placement, and wiring in sequence, with diagrams at each stage. Reviewers who built it consistently describe the instructions as clear and the parts list as accurate — you get wire gauge and magnet specs rather than vague descriptions. For someone who has never soldered, that scaffolding matters.
The subject is genuinely worth learning. The design is based on Nikola Tesla’s 1894 bifilar pancake coil patent — a real, public, historically significant winding method that changes a coil’s electrical properties. Understanding why it behaves differently is a legitimate lesson in electromagnetism, and the patent itself is free to read if you want to go deeper than the guide takes you.
The parts are affordable and findable. No exotic components, no specialty supplier. Reviewers report parts costs of roughly $63 to $100 for the smaller build, sourced locally. That keeps the total project well under what a comparable educational kit would cost.
The format is fast. Instant download, no shipping, no waiting. You can read the whole manual before deciding whether to buy parts — which is the right order to do things in.
The refund is real and platform-backed. The 60-day money-back guarantee runs through ClickBank, not the vendor alone. If the seller goes quiet, ClickBank support with your order number is a route that does not depend on anyone answering an email. That materially lowers the cost of trying it.
No subscription, no upsell required. The core product is a one-time $39 purchase. There is a one-time offer after checkout, but it is optional, and you can evaluate the main guide first.
It does produce a working device. Reviewers who completed the build describe a functioning result — an LED strip, a phone charging, a small low-watt gadget running. That is a real outcome, and for a hobbyist project, “it works at all” is the bar that matters most.
What to Know Before Buying
The savings claims do not hold up. A coil cannot output more energy than goes into it. The “50–80% bill reduction” figure is not supported by any independent test, and a typical US home uses close to 900 kWh a month — replacing 80% of that would require roughly a kilowatt of continuous output, which is far beyond what this build produces. Set your expectations at “small supplemental device,” not “power bill solution.”
Budget for parts separately. The guide is $39. The build is **roughly $63–$200** on top depending on size and component quality, and **those parts are not refundable**. Total realistic project cost: about **$100–$240**.
The author is anonymous by design. The guide is credited to a pen name, and the supporting entity is a company rather than a named engineer. That does not make the instructions wrong — they check out — but it does mean you cannot verify credentials before buying. The refund window is your protection in place of a verifiable resume.
The seller’s own terms are the most honest document in the funnel. They describe the product as an experiment that was not technically assessed. Take that sentence at face value, and the product makes sense; ignore it, and the marketing will disappoint you.
Home wiring is a licensed trade. A low-voltage bench project is not inherently dangerous. Connecting anything to your household electrical system is — and it belongs with a licensed electrician and your local code official, not a PDF. If your interest is educational, keep it on the bench.
Verify the domain before paying. Trust scores vary widely across similarly named storefronts, and some carry blacklist and phishing flags. Buy only through the checkout the vendor’s own terms name.
Who This Is a Good Fit For
- Hobbyists and tinkerers who want a structured project rather than figuring it out from scratch
- People curious about Tesla’s coil designs and electromagnetism as a hands-on subject
- Anyone who learns better from diagrams and a parts list than from a YouTube rabbit hole
- Buyers who will use the 60-day refund window as a genuine trial
- Parents or grandparents looking for a build project to do with an older kid — one reviewer describes exactly that use
Who Should Look Elsewhere
- Anyone expecting a whole-house power solution or a meaningful bill reduction
- People who want a finished device rather than instructions
- Anyone without basic DIY aptitude or a willingness to solder
- Renters or homeowners who cannot safely work on electrical setups — and anyone who would connect a home-built device to household wiring without an electrician
- Buyers who need verifiable engineering credentials before purchasing technical instructions
- Anyone who cannot confidently identify the official ClickBank checkout
Practical Notes
- Confirm the price at checkout. The current advertised price is $39**, shown against a crossed-out anchor. Archived versions have shown **$49, so the price moves — the anchor is marketing, not a former selling price.
- Use ClickBank for any refund. The 60-day window is platform-administered. If the seller does not respond, contact ClickBank support with your order number.
- Read the whole manual before buying parts. That is the single best way to judge whether the build is within your skill level, and it costs you nothing but time.
- Start with the smaller build. The full-size version costs more in parts, and the electrical lesson is the same.
- Keep it on the bench. Treat the project as education, not infrastructure.
The Verdict
The Energy Revolution System is a well-made, low-cost introduction to a genuinely interesting corner of electronics, sold with a promise it cannot keep. The instructions are clear, the parts are ordinary, the subject is worth learning, the device works at the scale it works at, and the refund is enforced by a third party rather than a vendor’s goodwill. For $39, that is a reasonable package — and the refund window means you can judge it for yourself at low risk.
The gap is the marketing. A coil does not produce more energy than it consumes, no independent test supports the savings figures, the author is anonymous, and the seller’s own terms call the product an experiment. Those facts do not make the guide bad. They make the headline bad, and the headline is not what you are buying.
Buy it if you want a structured, affordable electronics project and will treat it as a learning exercise with a realistic ceiling. Skip it if you are buying a power solution, need verifiable credentials, or expect the parts to be included — because at $39 plus roughly $100 in components, the only thing that will actually cost you more than you expected is the expectation itself.
This article is for informational purposes only and is not engineering, electrical, or safety advice. Consult a licensed electrician before connecting any home-built device to your electrical system.
*Editor’s notes: (1) Confirm or remove the author byline — do not use “Dr./MD” unless verified. (2) This is a positively framed review, not a testimonial — do not relabel it as customer feedback or add invented user quotes. (3) The “50–80% savings” claim must remain framed as unsupported marketing in the final copy; the seller’s own terms describe the product as “not technically assessed.” (4) The *parts cost ($63–$200) is separate from the $39 guide price and is not refundable** — keep that distinction clear. (5) The **home-wiring caution** should stay in the final copy. (6) Verify the current $39 price and ClickBank refund terms at checkout before publishing. (7) Do not link to any low-trust domains.